Bruit statique dans les deux écouteurs | SoundComm™ B40 headset
Be sure the radio is within range of its base station.
The wireless radio connected to the headset might be out of range of its base station. This can cause interference, poor or intermittent microphone or headphones. Try moving the radio closer to its base station.
Check to see if movement against the cable is causing the issue.
If the cable from the headset brushes against something (i.e. rubbing against clothing while walking), a scraping noise can travel through the cable, headset and microphone. This issue is amplified when multiple users experience the issue on the same intercom since the noise can travel through the microphones of connected the headsets and into the communication of other headsets.
- Use the provided clothing clips (or use additional clips) to prevent movement or material against the cable.
- Adjust the mic gain. If the gain is set too high, noise is more noticeable. Try turning down the mic gain so noise isn't picked up as easily
Branchez une autre paire d'écouteurs.
Connectez un autre casque à l'appareil audio pour déterminer si le problème vient de l'appareil ou de ses réglages.
Installez de nouvelles piles alcalines AA (LR6).
Retirez les piles de votre produit, puis insérez-en de nouvelles. Vérifiez que les + et – des piles correspondent aux indications du compartiment à piles. (Remarque : Les piles rechargeables ne sont pas recommandées. Utilisez de préférence des piles alcalines.)
